Description
Properties
3D Printing
| Extrusion temperature | 260 – 290 | °C | |
| Plate temperature | 100 – 140 | °C | |
| Enclosure temperature | > 100 | °C | |
| Nozzle (minimal) | All | | |
| Printing Speed | 50 – 70 | mm/s | |
| Warping | 0.5 – 0.7 | % | |
| Diameter | 1.75 & 2.85 | mm | +/- 50µm |
| Colours | Translucid, white, black | | |
Mechanical properties
Physical
| Density | 1.20 | g/cm3 | ASTM D792 |
| Water absorption | 0.15 | % | ASTM D570 |
Tensile
Results based on test specimens 3D printed at 0°, along with the tension stress.
| Young’s modulus | 2165 | MPa | ISO 527/1A |
| Ultimate strength | 53 | MPa | ISO 527/1A |
| Ultimate strength elongation | 4.1 | % | ISO 527/1A |
Flexion
| Module de Young | 2160 | MPa | ASTM D790 |
| Strength at yield | 90 | MPa | ASTM D638 |
Thermal Properties
| MFI | 10 | g/10min | 300°C, 1.2 kg / ASTM D1238 |
| HDT | 144 | °C | D648 @ 4.6 kg/cm2 |
| 133 | °C | D648 @ 18.6 kg/cm2 |
| Thermal expansion | 5.5 x 10-5 | mm/°C | ASTM D696 |
| Flammability | V-0 | at 3.0 mm | UL 94 |
Electric Properties
| Resistivity volume | 4×10^16 | Ω.cm | ASTM D257 |
| Dielectric strength | 30 | kV/mm | ASTM D149 |
| Dielectric constant | 2.80 | | ASTM D150 |
| Dissipation factor | 0.0082 | | ASTM D150 |
| ARC resistance | 120 | Sec | |
Documentation
Download the technical chart
Download the security chart
With a glass transition temperature of 140°C and certified fire resistant UL 94 V0, Nanovia PC-V0 allows for both mechanical and fire resistant 3D prints.
Ideal for the creation of molds for composite infusion, pre impregnated or even AFP draping. Widely used for industrial and electronic application thanks to its mechanical properties.
Advantages
- Great fire resistance
- Heat resistance up to 140°C
- Shock resistant
- Good mechanical properties
Colours
Nanovia PC-V0 is available in the following colours :
Application recommendations
Storage
- Store Nanovia PC-V0 in a dry and dark location, if possible with a desiccant.
- In order to guarantee good printing conditions dehydrate Nanovia PC-V0 at 100 °C for 4 hours or longer, when the spools has been exposed to moisture for an extended period.
Printing
- Extrusion temperature : between 260 and 290 °C
- Heated bed temperature : between 100 and 140 °C
- Heated enclosure temperature : > 100 °C
Post treatment
- For an outdoor usage, it’s recommended either paint or apply a protective UV coating, to prevent the polycarbonate from hydrolyzing and yellowing.
Health and safety
Printing
- We recommend printing Nanovia PC-V0 in a room equipped with air extraction or by using appropriate breathing equipment.
Post traitement
- We recommend wearing standard safety equipment during the post treatment of your prints made with Nanovia PC-V0.
Please consult the material safety sheet for more information.
Certifications
- RoHS certification Nanovia PC V0 :
Packaging
Spools are packed in individual boxes, vacuum sealed with desiccant. Spools are equipped with both a material traciblity and a production series number.
Other sizes available up to 25kg on demand.
| Spool | L1 | L2 | D1 | D2 | D3 | Weight |
| 500g | 53 | 46 | 200 | 90 | 52 | 182 g |
| 2kg | 92 | 89 | 300 | 175 | 52 | 668 g |
