Nanovia PEI : High thermal resistance Ultem 1010

15,40 322,50  exl. VAT

The Nanovia PEI filament, based on Ultem 1010 plastics, allows for high heat resistance and thermal stability. Nanovia PEI is resistant to autoclave operation, sterilisation cycles, and adapted for tooling able to resist high temperatures.




3D Printing

Extrusion temperature370 – 390°C
Plate temperature120 – 160°C
Enclosure temperature> 120°C
Nozzle (minimal)All
Printing Speed20 – 60mm/s
Diameter1.75 & 2.85mm+/- 50µm
ColourNative (Yellow)

Mechanical properties


Density1.27g/cm3ISO 1183
Water absorption (24h)1.25%ISO 62


Young modulus3200MPaISO 527
Ultimate strength105MPaISO 527
Elongation at break60%ISO 527


Young modulus3300MPaISO 527
Ultimate strength160MPaISO 527


Izod (notched)5kJ/m2ISO 180/1A

Thermal properties

HDT B (0,45 MPa)200°CISO 75/Be
FlammabilityV01.5 mmUL-94

Electrical properties

Volume resistivity1.E+15Ohm-cmIEC 60093
Dielectric strength33kV/mm (oil, 0.8 mm)IEC 60243-1
Relative permittivity2.9(1 MHz)IEC 60250
2.9(50/60 Hz)IEC 60250
Dissipation factor0.0005(50/60 Hz)IEC 60250
0.006(1 MHz)IEC 60250
0.0025(2450 MHz)IEC 60250
Download the technical chart Download the security chart

Nanovia PEI 3D printer filament, Ultem1010 based, is solvent, chemical and shock resistant. These properties allow for functional prints withstanding temperatures up to 200 °C.

Ideal for the creations of tools that need to undergo and withstand the high temperatures of autoclave, as well as gamma ray sterilisation, for medical use.

Perfectly suited for industrial applications in high temperature environments and composite tooling.


  • Operational temperature up to 200 °C
  • High thermal stability
  • Suited for tooling
  • Adapted for autoclave sterilization
  • Gamma ray resistant
  • Solvent resistant
  • Shock resistant

Application recommendations


  • Store Nanovia PEI in a dry and dark location, if possible with a desiccant.
  • In order to guarantee good printing conditions dehydrate Nanovia PEI at 110 °C for 4 hours or longer, when the spools has been exposed to moisture for an extended period.


  • Extrusion temperature : 370 à 390 °C
  • Heated bed temperature : 120 à 160 °C
  • Heated enclosure temperature : > 120 °C

Health and safety


  • We recommend printing Nanovia PEI in a room equipped with air extraction or by using appropriate breathing equipment.

Post traitement

  • We recommend wearing standard safety equipment during the post treatment of your prints made with Nanovia PEI.


  • Certification RoHS Nanovia PEI : Nanovia PEI certified RoHS


Spools are packed in individual boxes, sous-vide with desiccant. Spools are equipped with both a material traciblity and a production series number.

Other sizes available up to 25kg on demand.

500g53462009052182 g
2kg928930017552668 g

Exemple by our partner IRMA, Regional institution of advanced materials

Additional information

Weight N/A
Max temperature

220 °C, 150 °C, 120 °C, 100 °C, 80 °C, 55 °C


1.75 mm, 2.85 mm


sample, 500 g, 2000 g