Insublend : Non-flammable UL94 VO

Nanovia Insublend allows for prints with high thermal, mechanical properties, flame resistance and dielectric. Certified non-flammable UL V0.

Description

Properties

3D Printing

Extrusion T°260 – 280 °C
Plate T°130 – 150 °C
Enclosure T°110 °C
NozzleAll
Printing speed50 – 70 mm/s
Linear Weight2.60 @ Ø 1.75 mm
7.00 @ Ø 2.85 mm
ColourBlack

Mechanical Properties

Density1,08 g/cm3 (ISO 1183)
Module de Tension67 MPa (ISO 527)
Module de Flexion2430 MPa (ISO 527)
Elong. at break20 % (ISO 178)
Moisure absorption0.10 %
Warping0,5 / 0,7 %

Thermal Properties

Tg140 °C
DTUL114 °C
FlammabilityV0 UL 94 at 1.6mm
5VA UL 94 at 2.5 mm

Electric Properties

Dielectric Constant100 Hz : 2.9
1 MHz : 2.9 (IEC60250)
Dissipation Factor100 Hz : 0.0003
1 MHz : 0.0004 (IEC60250)
Dielectric strength29 KV / mm (IEC60243)
Volume Resistivity10.10^15 Ohms (IEC60093)
Surface Resistivity10.10^15 Ohms (IEC60093)
Tracking resistance190 V (IEC60112)

Documentation

Download teh technical chart Download the security chart

Engineered for outdoor electrical equipment, Nanovia Insublend filament allows for the creation of insulating and weatherproof 3D prints.

Nanovia Insulblend is perfect for electronics (board supports, connectors…), prototypes and industrial use.

Its resistance to alkali, acid , bases, ionic, and alcohol solutions , makes it an ideal material for batteries.

Avantages:

  • Insulating
  • Certified non flammable V-0 UL94
  • UV and oxydation resistant
  • Alkali, acid, bases, ionic, alcohol resistant
  • Suited for outdoor use

Application recommendations

Storage

  • Store Nanovia Insublend in a dry and dark location, if possible with a desiccant.
  • In order to guarantee good printing conditions dehydrate Nanovia Insublend at 60°c for 4 hours or longer, when the spools has been exposed to moisture for an extended period.

Printing

  • Extrusion temperature : between 260 and 280°C
  • Heated bed temperature : between 100 and 140°C
  • Enclosure temperature : 110 °C

Health and safety

Certified UL94

Nanovia Insublend filament , halogen free, is certified non flammable V-0 (@ 1,6 mm with a 5VA @ 2.5mm index) and flame retardant according to the UL 94 certification *.

UL 94 is a security certification for plastic materials. V-0 classification = no combustion after 10 seconds of vertical exposure to a flame.

Printing

  • We recommend printing Nanovia ABS AF in a room equipped with air extraction or by using appropriate breathing equipment. Whilst printing ABS produces a VOC derivative of styrene.

Post treatment

  • We recommend wearing standard safety equipment during the post treatment of your prints made with Nanovia ABS Insulblend

Chemical resistance at 20 °C :

Resistance

Acids

Boiling waterExcellent
Hydrochloric acid (solution at 50%)Excellent
Sulphuric Acid (solution at 50%)Excellent
Nitric acid (solution at 50%)Excellent
Phosphoric acid (solution at 60%)Excellent
Acetic acidExcellent

Alcohols

IsopropylGood
MethanolExcellent
EthanolExcellent

Ionic aqueous solution

Brine (satured NaCl)Excellent
Ammonium phosphateExcellent

Bases

Ammonia (solution at 10% NH3)Excellent
Caustic soda (solution with 10% NaOH)Excellent

Cetones

AcetoneWeak
MethylEthylKetoneWeak

Aromatics

TolueneWeak
XyleneWeak

Hydrocarbons

Cyclohexane and n-HexaneWeak
n-HeptaneModerate
Liquid paraffinModerate
Diesel fuel Moderate
KeroseneWeak
LubrifiantsModerate
GreasesWeak

Solvants

Carbon tetrachlorideWeak
ChloroformWeak
Tributyl phosphate Phosphate
Ethyl acetateWeak

Merci de consulter la fiche de sécurité pour plus d’informations.

Packaging

Spools are packed in individual boxes, sous-vide with desiccant. Spools are equipped with both a material traciblity and a production series number.

Other sizes available up to 25kg on demand

SpoolL1L2D1D2D3Weight
500g554520010552252 g
2kg1009030021052640 g

Additional information

Max temperature

100 °C, 80 °C, 55 °C